iQsub underwater Housings
for action cameras
GoPro Mission 1 Pro
GoPro HERO 13
DJI Action 5
iQsub durable underwater housings are designed for underwater usage in extreme conditions.
Housings are produced in two versions according to the maximum depth of use:
Delrin Housings is tested for operational depth up to 150m/500ft.
ALU Housing is tested for operational depth up to 300m/1000ft.
GoPro Mission 1 Pro
Delrin Housings
The iQsub GoPro Delrin Housing is available for the latest model of GoPro Mission 1 Pro camera.
The GoPro Mission 1 Pro Delrin Housing is made of a solid piece of Delrin.
The housing is lightweight yet very durable.
The buoyancy of the housing, including the camera and mount, is -0.15 kg / -0.33 lb.
The lens port is made of optical quality Perspex (PMMA) and is sealed with an o-ring.
It can be replaced anytime if needed. There is no vignetting underwater.
On the front side there is a small window for the GoPro camera front display.
The control buttons, springs and pins are made of stainless steel.
The rear door has a back window for the main camera display. The door is locked with the low
profile upper buckle. The back window has no touch functionality.
The housing has a bottom holder that fits standard GoPro holders and mounts.
Each GoPro DELRIN Housing is tested in a pressure chamber
at a minimum depth of 170m/560ft.
GoPro HERO 13, 12, 11, 10, 9
Delrin Housings
The iQsub GoPro Delrin Housings are available for the latest model of GoPro HERO cameras.
The iQsub GoPro 13 Delrin Housing fits GoPro HERO 13 cameras.
The iQsub GoPro 12 Delrin Housing fits GoPro HERO 12, 11, 10, 9 cameras.
The GoPro 13, 12 Delrin Housings are made of a solid piece of Delrin.
The housing is lightweight yet very durable.
The lens port on the GoPro 13 model is made of optical quality Perspex (PMMA)
and the lens port on the GoPro 12 model is made of borosilicate glass.
The lens port is sealed with an o-ring and can be replaced if needed.
There is no vignetting underwater.
On the front side there is a small window for the GoPro camera front display.
The control buttons, springs and pins are made of stainless steel.
The rear door has a back window for the main camera display. The door is locked with the low
profile upper buckle. The back window has no touch functionality.
The housing has a bottom holder that fits standard GoPro holders and mounts.
Each GoPro DELRIN Housing is tested in a pressure chamber
at a minimum depth of 170m/560ft..
GoPro HERO 13, 12, 11, 10, 9 ALU Housings
The iQsub GoPro 13 ALU Housing fits GoPro HERO 13 cameras.
The iQsub GoPro ALU 12 Housing fits GoPro HERO 12, 11, 10, 9 cameras.
The GoPro 13, 12 ALU Housings are made of hard anodized aluminum alloy with teflon coating.
The housing is lightweight yet extremely durable.
The lens port is made of optical quality Perspex (PMMA).
The lens port is sealed with an o-ring and can be replaced if needed.
There is no vignetting underwater.
On the front side there is a small window for the GoPro camera front
display.
The control buttons, springs and pins are made of stainless steel.
The rear door has a back window for the main camera display.
The back window has no touch functionality. The door is locked
with the low profile upper buckle.
The housing has a bottom holder that fits standard GoPro
holders and mounts.
Each GoPro ALU Housing is tested in a pressure
chamber at a minimum depth of 170m/560ft.
iQsub DJI Delrin Housing
The iQsub DJI Action 5 Delrin Housings is available for the DJI Action 5 camera.
The DJI Action 5 Delrin Housings is designed and tested for operational depth up to 150m/500ft.
The housing is made of a solid piece of Delrin. It is lightweight yet very durable.
The lens port is made of optical quality Perspex (PMMA).
The lens port is sealed with an o-ring and can be replaced if needed.
There is no vignetting underwater.
On the front side there is a small window for the camera front display.
The control buttons, springs and pins are made of stainless steel.
The rear door has a back window for the main camera display. The back window has no touch
functionality. The door is locked with the low profile upper buckle.
The housing has a bottom holder that fits DJI and GoPro holders and mounts.
Each DJI Action 5 Delrin Housing is tested in a pressure chamber
at a minimum depth of 170m/560ft.